R. V. Industries
R. V. Industries
Ambegaon, Pune, Maharashtra
Send SMS
Send E-mail

Industrial Tray Washing Machines

Pioneers in the industry, we offer industrial tray washing machines from India.
Request CallBack
Industrial Tray Washing Machines
Get Best Quote

Industrial Tray Washing Machines

Approx. Price: Rs 1 / UnitGet Latest Price
Product Details:
BrandR.V Industries
Rated Capacity100 kg
Loading TypeFront Loading
Usage/ApplicationIndustrial
Motor Power240
Size/DimensionStandard
Cycle Timing1
DesignStandard
Max Temperature70
Tray Washing :Operator will open the door and load the tray in reciprocating bracket. After loading the tray he will close the door and will start the cycle. Once cycle is on spray will start from nozzles and tray will start reciprocating. After preset time flow will stop. Reciprocating motion will continue for some time and after cycle time is over reciprocating will stop and machine will give indication of cycle over. Operator will open the door and will remove the clean tray and put another one for washing.Features 1] MAGNETIC SEPARATOR :- (Optional) The drain of washing chambers is connected to magnetic separator. Spent washing media after washing will be directed to magnetic separator. Magnetic separator will separate burr, dust from washing media and the same will be collected in separate bin, tray. Burr and dust free washing media will be collected in the tank. Industrial Tray Washing Machines2] FILTRATION SYSTEM :-5 to 10 micron filter cartridges are placed in suitable housing. High pressure pump will deliver the washing media in filter housing. Filtration will take place under pressure and filtered washing media will be sprayed on components. Thus ensuring very high degree of washing efficiency. (Millipore values up to 5mg can be achieved in valve bodies) 3] NOZZLE ASSEMBLY :-Tray is located in upside down position. As component is located in a fixture in a specific orientation nozzles are fixed in such a manner that it will cover all the pockets of the tray while reciprocketing . From front side nozzles fixed on door will clean the component from loading side. Nozzles are placed as close as possible to the surface of component so as to get maximum washing efficiency.4] MIST COLLECTOR :- (Optional) Due to high pressure of washing media and drying by compressed air lot of mist is generated inside washing chamber. When door is opened this mist will escape through the door. This can pose serious problems to operator. 
Specification Sheet

NO.DescriptionSpecification
   
01.Overall Dimensions1400 L ´ 2000 W ´ 2500 H
  
02.Washing MediaWater based mild alkaline solution
  
03.Filtration systemCartridge type, 5 / 10 micron
  
04.Total Electrical power required30 H.P./ 22.5Kw, 440VAC, 65 Amp
  
05.Washing spray Pressure4.5 bar pressure
  
06.Component size rangeTray size 600 ´ 400 1nos. or 
400 ´ 300 2nos. or 
Smaller trays in multiples. 
For components washing S.S. wire mesh tray of 600 ´ 400 is provided. 
  
07.Washing cycleWashing time 1 min. 
Drying time 1.5 min. 
Total cycle time including loading unloading 3 min. (Settable) In case of bins drying cycle can be deleted resulting in higher output.
  
08.Material of constructionComplete stainless steel (S.S. 304) 
OR in mild steel duly powder coated 
OR in combination of both.

Yes! I am Interested
X